Categories

    Miniature Circuit Breakers YCB6H-63 in Pakistan

    Rs 550 – Rs 2,200

    A miniature circuit breaker (MCB) is an Electrical Switch which automatically switches off the electrical circuit during an abnormal condition of the network means in overload condition as well as faulty...

    CNC Automatic Transfer Switch ATS YCQ1B in Pakistan

    Rs 8,500 – Rs 12,000

    An automatic transfer switch (ATS) is a device that automatically transfers a power supply from its primary source to a backup source when it senses a failure or outage in the...

    CNC 1000V DC FUSE RT18-32 in Pakistan

    Rs 750

    The DC fuse opens or breaks the circuit when the excessive current flow through it. The only difficulty with the DC fuse is that the arc produced by the direct current...

    CNC DC Miniature Circuit Breakers YCB9-80DM in Pakistan

    Rs 1,900 – Rs 4,000

    YCB9-80DM DC series circuit breaker is specially used for the photovoltaic system, it is rated working voltage can be up to DC1000V. The circuit breaker adopts a special extinguishing and...

    CNC Residual Current Circuit Breakers YCB6HLE-63 in Pakistan

    Rs 1,265 – Rs 2,590

    A Residual Current Circuit Breaker (RCCB) is an important safety measure when it comes to protection of electrical circuits. It is a current sensing device, which can automatically measure and disconnect...

    CNC AC Magnetic Contactors CJX2-S 12-95A in Pakistan

    Rs 1,700 – Rs 11,270

    CJX2s Series AC Contactor with novel appearance and compact structure is suitable for using starting & controlling the AC motor frequently, switching on and off the circuit at a long...

    CNC Change over Din Rail YCBZ-63 in Pakistan

    Rs 1,700

    DIN rails are the metal rails inside an electrical enclosure that are used to mount circuit breakers and other types of electrical equipment. Although DIN rails have a relatively simple design,...

    CNC YCS1 Electrical ATS Panel Board Automatic Transfer Switch in Pakistan

    Rs 21,275 – Rs 116,250

    YCS1 automatic transfer switch (ATSE) is set the switches and control logic integrated without additional controller, achieve integration of automatic electro mechanical switch, voltage detection, frequency detection, communication interface, electrical,...

    CNC Volt Ampere Protection Device Voltage Protector 63A YC9-VA in Pakistan

    Rs 6,000Rs 5,000

    YC9VA voltage and current display relay is a microprocessor-based voltage monitoring device for single-phase AC networks to protect electrical equipment from surge voltage. The device analyzes the main voltage and displays...

    CNC Molded Case Circuit Breakers YCM7 in Pakistan

    Rs 6,000 – Rs 65,000

    A Moulded case circuit breaker (MCCB) is a type of electrical protection device that is used to protect the electrical circuit from excessive current, which can cause overload or short circuit. Specification:...

    CNC Molded Case Circuit Breakers YCM1 in Pakistan

    Rs 6,500 – Rs 6,700

    A Moulded case circuit breaker (MCCB) is a type of electrical protection device that is used to protect the electrical circuit from excessive current, which can cause overload or short circuit. Specification:...

    CNC Magnet Thermal Overload Relay JR28S in Pakistan

    Rs 1,095 – Rs 1,670

    JR28s series thermal overload relay are suitable for overload and phase-failure protection of AC motors with frequency of 50/60Hz, voltage up to 690V, current up to 0.1-630A under 8-hours duty...

    CNC YCD9-3-RGY Din-Rail Panel Indicator in Pakistan

    Rs 450

    The CNC YCD9-3 Din-Rail Panel Indicators are signal lights used to visually indicate the status of electrical circuits.  These compact indicators easily mount on DIN rails and are commonly available...

    CNC 1500V DC FUSE RT18-63 in Pakistan

    Rs 2,100

    The DC fuse opens or breaks the circuit when the excessive current flow through it. The only difficulty with the DC fuse is that the arc produced by the direct current...

    CNC AC Surge Protection Devices YCS6-B in Pakistan

    Rs 7,450 – Rs 9,175

    YCS6-B series Surge Protection Device is suitable for TT, IT, TN-S, TN-C and TN-C-S, the power supply system with the rated voltage up to 230/400V and AC 50/60Hz. Its design...

    CNC Pakistan 
    Was founded in 1988 and specialized in Low-voltage electrical and Power Transmission and Distribution industries. We provide our customers with profitable growth by offering integrated comprehensive electrical solutions.
    CNC Electric key value is innovation and quality to ensure clients with safe, reliable products. We set up advanced assembly line, test center, R&D Center and quality control center. We have got the certificates of ISO9001, ISO14001, OHSAS18001 and CCC,CE, CB, SEMKO etc.
    CNC WILL KEEP ON OPTIMIZING AND UPGRADING THE INDUSTRIAL STRUCTURE WITH ITS ACTIVE INNOVATION THROUGH OF COOPERATION AND DEVELOPMENT SO AS TO PROVIDE CUSTOMERS WITH MORE PERFECTLY OVERALL SOLUTIONS.
    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    January,February,March,April,May,June,July,August,September,October,November,December
    Not enough items available. Only [max] left.
    Add to WishlistBrowse WishlistRemove Wishlist
    Shopping cart

    Your cart is empty.

    Return To Shop

    Add Order Note Edit Order Note