| 1. Input |
| Thermocouple( k type |
| 2. Accuracy |
| Measure accuracy |
±0.5%FS |
| Compensation error of cold terminal |
±2°C(amend within 0~50°C by soft) <![if !support Line Break New Line]> <![end if]> |
| Resolution |
14 bit |
| Sampling period |
0.5Sec. |
| 3. Display |
| PV,SV |
-1999 ~ +1999 |
| Output( OUT1,OUT2) Alarm(Alarm1,Alarm2) Auto setting(AT) Display |
LED |
| 4.Control way |
|
| Control way 1 |
Auto Setting Control |
| Control way 2 |
PID Control(including ON/OFF, position PID and continuous PID) |
| 5. Controlling output |
| Currency output |
DC 0~10Ma,4~20mA(RL less than 500?) |
| Voltage output |
DC 0-5V,1-5V(RL more than 10K) |
| Relay output |
contact capacity 250VA (resistance load) |
| Voltage Impulse output |
0~12V, (suitable for the solid relay SSR) |
| Silicon Controlled Rectifier(SCR) output |
zero-cross triggering or phase-shift triggering(resistive load) |
| Capacity of the output contact |
250V AC 3A (resistant load) |
| Alarm output |
2 groups output at most,12 modes |
| 6. Setting range |
| Setting value (SV) |
Measured Present Value (PV) |
| Proportional band (P) |
0 ~ whole measured range (when set 0, it's ON/OFF control |
| Integral time |
0~3600 Sec (when the time is 0, the function of integral time closed) |
| Derivative time |
0~ 3600 Sec (when the time is 0, the function of differential time closed) |
| Proportional term |
1~100 Sec |
| On-off control output hysteretic loop width |
1~100? (or other pv units) |
